Submitted by Henry on
It transforms hard water into so-called soft water. The reduction of the mineral content leads to a transformation. The heavy water contains mainly calcium and magnesium metal and sometimes bicarbonates and sulfates. Soft water, on the other hand, is a type of water in which this mineral content is practically nonexistent.
The method was used in ancient times to reduce calcium, magnesium and, in some cases, manganese and iron (II) dissolved in hard water. The truth is that the conditioner is a chemically rigid water return system in soft water. Should you pick this water softener is the question many people try to find answers to.
Softners substitute the calcium and magnesium content in hard water with sodium. Sodium does not accumulate in the tubes and does not react to soap. This means that the effects of raw water are eliminated. The principle of the softening system is easy to understand. Rough water penetrates the water softener. It contains a layer of plastic balls and in some cases, the material used is called zeolite. The material layer in the water balsam is saturated with sodium ions. Sodium is exchanged for hard water, calcium, and magnesium. When the water comes out of the conditioner, it is called soft water.
At one point, the plastic beads or the zeolite layer are only saturated with calcium and magnesium ions. This is followed by a regeneration process in which the water with high sodium content is mixed to form a strong saline solution. Sodium ions, in turn, replace calcium and magnesium ions that eventually flow into the drainage channel.
Conventional table salt is cheap. Salt or sodium chloride is a source of sodium for water softeners. A lot of salt costs something. It is a good source of sodium that is used in the water softener. The water softening system utilizes several cylindrical tanks and large square tanks. The tanks store the already treated water and the tank is used for the salt used in the process. The number of tanks depends on the energy and the system itself.
When installed at home or at home, the softening system is located at the main entrance of the sanitary system. In this installation method, all the water entering the house has already been cleaned.
Water softening systems are of two types. One is an electric balm for a tank. This type is not only expensive but also a system with a few drawbacks. Soft water can last until the system uses a tank. This can also lead to inconveniences, as this type requires high pressure. The night brings great pressure. Noise from the motor operation is not desired during these hours.
The double hydraulic tank is another conditioner. This type ensures a constant supply of soft water to the household. Two tanks alternately perform softening and regeneration processes. Thus, there is no chance of evacuating the supply of soft water.
Salt containers should be filled regularly. Most softeners have no salinity indicator. It is a wise decision to regularly check the salt level to avoid contamination of the water tanks. Conditioners work continuously without salt, which can lead to contamination of the tanks.
Saltwater softening systems are not 100% efficient. The calcium and magnesium content of the water is only 75% removed. The salt-based conditioner also releases a large amount of calcium chloride solution into the environment.WHICH of the two water softener? Both ancient and modern softners are good but the modern ones are the best.